Power Washing in Urbana, MD

Your Home Looks New Again

Professional power washing that restores your property’s beauty without the weekend hassle or equipment headaches.

Hear from Our Customers

Professional Power Washing Services

What Clean Really Looks Like

Your driveway stops looking like a science experiment. That green film disappears from your siding, and your deck actually looks like the wood you paid for.

You get your weekends back instead of wrestling with rental equipment that barely works. No more wondering if you’re using too much pressure or not enough.

Your home’s curb appeal comes back to life. Neighbors notice. Your property value reflects the care you put into it. And you didn’t have to spend your Saturday figuring out why the pressure washer won’t start or dealing with streaky, uneven results that make you wish you’d never started the project.

Urbana Power Washing Company

We Know Maryland Properties

High Pro Power Washing Service Inc has been cleaning homes throughout Urbana and Frederick County for years. We understand how Maryland’s humidity affects your siding and what it takes to remove the mold and mildew that builds up here.

We’re not the guys who show up with a pressure washer and hope for the best. We know which surfaces need gentle cleaning and which can handle more aggressive treatment.

You’re dealing with a local company that shows up when scheduled and cleans up when finished. We’ve seen every type of siding, deck, and driveway problem that Maryland weather can create.

Our Power Washing Process

How We Get It Done

We start by walking your property and identifying what needs attention. Different surfaces get different treatment – your vinyl siding doesn’t get the same pressure as your concrete driveway.

We pre-treat areas with heavy mold or stains using appropriate cleaning solutions. Then we systematically clean each surface with the right pressure settings and techniques. Your landscaping gets protected, and we work around your schedule.

After cleaning, we do a final walkthrough to make sure everything meets our standards. You get a property that looks refreshed without any of the guesswork or physical strain of doing it yourself. The whole process typically takes a few hours depending on your property size.

Ready to get started?

Explore More Services

About High Pro Power Washing

Get a Free Consultation

House Power Washing Services

What Gets the Full Treatment

We handle your home’s exterior from top to bottom. Siding gets cleaned without damage to caulking or forcing water behind panels. Driveways and walkways get the heavy-duty treatment to remove oil stains and years of buildup.

Decks and patios get cleaned properly – removing mildew without gouging the wood or damaging composite materials. We clean gutters, downspouts, and outdoor fixtures that collect grime over time.

In Urbana’s climate, we see a lot of algae and mold growth on north-facing surfaces and shaded areas. We know how to treat these problem spots effectively. Your windows get cleaned as part of the process, and we make sure water doesn’t end up where it shouldn’t be.

How often should I have my house power washed in Maryland?

Most Maryland homes benefit from professional power washing every 12-18 months. Our humid climate accelerates mold and mildew growth, especially on north-facing surfaces and shaded areas. If you have a lot of trees around your property or live in a particularly humid area of Urbana, you might need service closer to annually. Signs it’s time include visible green or black streaks on siding, slippery deck surfaces, or a generally dingy appearance that regular garden hose rinsing won’t fix. Regular cleaning actually saves money long-term by preventing permanent staining and extending the life of your exterior surfaces.

Will power washing damage my siding or windows?

Not when done correctly with proper equipment and technique. We adjust pressure settings based on your specific siding material – vinyl, wood, brick, and stucco all require different approaches. The key is using the right pressure, proper spray angles, and appropriate cleaning solutions. We never use pressure that could force water behind siding or damage caulking around windows. Many DIY disasters happen because people use too much pressure or hold the nozzle too close to surfaces. Professional equipment gives us better control, and experience tells us exactly how each surface should be treated to get clean results without damage.

What's the difference between power washing and pressure washing?

The terms are often used interchangeably, but technically power washing uses heated water while pressure washing uses cold water. For most residential exterior cleaning in Maryland, cold water pressure washing is perfectly effective and what we typically use. Hot water power washing is beneficial for removing grease, oil, or extremely stubborn organic growth, but it’s not necessary for standard house washing, deck cleaning, or driveway maintenance. The cleaning solutions and proper technique matter more than water temperature for typical residential cleaning needs. We choose the right approach based on what we’re cleaning and what type of buildup we’re dealing with.

How long does it take to power wash a house?

A typical single-family home in Urbana takes 2-4 hours depending on size, condition, and what surfaces we’re cleaning. A basic house wash might take 2-3 hours, while a complete exterior cleaning including driveway, deck, walkways, and detailed work around landscaping can take 4-6 hours. Heavily soiled surfaces or homes that haven’t been cleaned in several years take longer because we need extra time for pre-treatment and careful cleaning. We don’t rush the job – it’s better to take the time needed to do it right than to hurry and miss spots or cause damage. Weather conditions can also affect timing since we can’t work safely in high winds or storms.

Do I need to be home during the power washing service?

You don’t need to be home the entire time, but we do like to do a quick walkthrough with you at the beginning to discuss any specific concerns or problem areas. We’ll also want to show you the completed work and address any questions you might have. If you can’t be home, we can work with a key or garage code for water access, but we’ll need to coordinate this ahead of time. We always make sure gates are closed, outdoor furniture is back in place, and everything is secured before we leave. Most homeowners prefer to be available at the start and end of the service, but it’s not required for the entire duration.

What should I do to prepare my property for power washing?

Close all windows and make sure exterior doors are shut tight. Move or cover outdoor furniture, grills, and decorative items that could be damaged by water or cleaning solutions. Clear items away from the foundation and areas we’ll be working around. If you have delicate plants or flowers near the house, let us know so we can take extra care to protect them. Make sure we have access to water spigots and any areas that might normally be locked or gated. Remove items from decks and patios if possible. Don’t worry about basic lawn furniture or planters – we work around most outdoor items regularly. The main thing is securing anything that water could damage and making sure we can move freely around your property.

Local Resources

Urbana, MD is located in Frederick County in Maryland State