Power Washing in Kimberley, MD

Your Property Looks New Again

Professional power washing that removes years of buildup in hours, not weekends.

Proper surface preparation is crucial for effective power washing. Junk Raps in Long Island, NY outlines key steps to ensure your property is ready for cleaning and protected from damage

Hear from Our Customers

A person in green rubber boots, gloves, and protective clothing is pressure washing Montgomery County, MD paving stones in red and gray on an outdoor path beside some bushes.

Professional Power Washing Services

What Clean Really Looks Like

You know that feeling when you drive up to a house that just looks right. The driveway isn’t stained with oil spots and tire marks. The siding actually matches the color it was when it was installed. The deck looks like somewhere you’d want to spend time, not avoid.

That’s what happens when power washing is done correctly. Your property doesn’t just get clean – it gets restored. Neighbors notice. Your family feels proud to pull into the driveway. And you stop making mental notes about all the things that need attention every time you look at your house.

The difference isn’t just cosmetic either. When you remove mold, mildew, and organic buildup from your exterior surfaces, you’re preventing damage that costs thousands to repair later. Clean surfaces last longer, look better, and protect your investment in ways that matter long after the job is done.

Kimberley Power Washing Company

We Know Maryland Properties

High Pro Power Washing Service Inc has been cleaning properties in Kimberley and surrounding Maryland communities for years. We understand what Maryland’s humid climate does to exterior surfaces – and more importantly, we know exactly how to fix it.

You’re not getting a crew that treats every job the same. Different surfaces need different approaches, different pressures, different solutions. Your vinyl siding gets handled differently than your neighbor’s brick. Your composite deck requires a completely different technique than a wooden one.

We’re licensed, insured, and equipped with commercial-grade equipment that delivers results you can’t get from a rental unit. When we’re done, your property looks the way it should – and stays that way longer than if you’d tried to tackle it yourself.

A power washer in MD cleans white vinyl house siding, revealing a sharp line between the freshly washed, bright surface on the left and the dirtier, grayish side—showcasing expert pressure washing Montgomery County results.

House Power Washing Process

Simple Process, Professional Results

We start with a walkthrough of your property to identify what needs attention and what surfaces we’re working with. Not every exterior surface can handle the same pressure, and we adjust our approach accordingly. You’ll know exactly what we’re doing and why before we start.

The actual cleaning process involves pre-treating problem areas, applying the right cleaning solutions for your specific surfaces, and then using controlled pressure to remove buildup without causing damage. We work systematically around your property, protecting landscaping and ensuring water doesn’t end up where it shouldn’t.

After the cleaning is complete, we do a final walkthrough with you to make sure everything meets your expectations. You’ll see the difference immediately – surfaces that looked permanently stained or discolored are restored to their original appearance. The whole process typically takes a few hours, depending on your property size, and you can use your outdoor spaces the same day.

A close-up of a pressure washer spraying water onto a wooden deck, cleaning the surface and making the wood look brighter and cleaner. Green plants are visible in the blurred background, showcasing expert pressure washing Montgomery County, MD.

Ready to get started?

Explore More Services

About High Pro Power Washing

Get a Free Consultation

Exterior House Cleaning Services

Complete Exterior Cleaning Solutions

Our power washing services cover everything on your property’s exterior that accumulates dirt, mold, and stains over time. House siding gets the most attention because it’s the largest surface area, but we also handle driveways, walkways, patios, decks, fences, and outdoor furniture.

Each surface type gets treated with the appropriate pressure and cleaning solution. Concrete driveways can handle higher pressure to remove oil stains and tire marks. Wooden decks require gentler treatment to avoid damage while still removing mildew and discoloration. Vinyl siding needs moderate pressure with the right angle to avoid forcing water behind the panels.

We bring our own water supply when needed and use eco-friendly cleaning solutions that are safe for your landscaping and family. All equipment is commercial-grade and maintained regularly to ensure consistent results. You don’t need to provide anything – we handle the entire process from setup to cleanup, leaving your property clean and your outdoor spaces ready to use.

A man in a red shirt and cap uses a pressure washer to clean the exterior wall of a house near a door and window, surrounded by greenery and sunlight, showcasing expert pressure washing Montgomery County, MD.

How often should I have my house power washed in Maryland?

Most Maryland homes benefit from professional power washing every 12-18 months, though this varies based on your specific conditions. Properties with more shade, trees nearby, or north-facing surfaces that don’t get much sun tend to develop mold and mildew faster and may need cleaning annually. Homes in full sun with good drainage can often go 18-24 months between cleanings. The key is addressing buildup before it becomes permanent staining or starts causing surface damage. If you’re noticing green or black streaks on your siding, or your deck feels slippery when wet, it’s time for a cleaning regardless of when you last had it done.
Professional power washing won’t damage your surfaces when done correctly, but technique and equipment matter significantly. We adjust pressure settings based on what we’re cleaning – vinyl siding gets different treatment than brick or concrete. The angle of the spray, distance from the surface, and type of nozzle all affect the results. This is why rental equipment often causes problems – homeowners don’t have the experience to make these adjustments properly. We’ve been doing this long enough to know exactly how each surface type responds to different pressures and techniques. Our commercial equipment also provides better control than consumer-grade units.
The terms are often used interchangeably, but technically power washing uses heated water while pressure washing uses cold water. For most residential exterior cleaning, heated water isn’t necessary and cold water pressure washing is perfectly effective. The more important factors are using the right pressure for each surface, proper cleaning solutions when needed, and having the experience to recognize what approach works best for different types of buildup. Whether you call it power washing or pressure washing, the goal is the same – removing dirt, mold, and stains without damaging your property.
A typical single-story home takes 2-4 hours to power wash completely, while two-story homes usually require 4-6 hours. The timeline depends on your home’s size, how much buildup we’re dealing with, and what surfaces are included in the cleaning. Heavily stained areas need pre-treatment time, and some surfaces require more careful attention than others. We also factor in setup and cleanup time, plus the final walkthrough to ensure everything meets your expectations. Most homeowners are surprised how quickly the transformation happens once we get started, but we never rush the process just to save time.
Yes, we bring all necessary equipment including commercial-grade pressure washers, hoses, nozzles, and cleaning solutions. For water supply, we can work with your existing outdoor spigots in most cases, though we can bring our own water source if your property doesn’t have adequate access or water pressure. All our equipment is maintained regularly and designed for professional use – it’s much more powerful and reliable than rental units. We also carry different types of nozzles and attachments for different surfaces, plus eco-friendly cleaning solutions that are safe for your landscaping and family.
Preparation is minimal on your end. Remove or secure any lightweight outdoor furniture, decorations, or items that could be affected by water spray. Close all windows and doors, and let us know about any areas of concern like loose siding, recent repairs, or delicate plants you want us to be extra careful around. We handle protecting larger items and landscaping as part of our service. If you have outdoor electrical outlets or fixtures in the areas we’ll be cleaning, just point them out during our initial walkthrough. Most of our prep work happens on-site as part of the service.