Power Washing in Glenallen, MD

Your Home's Curb Appeal Restored

Professional power washing that brings back the clean you thought was gone forever.

Proper surface preparation is crucial for effective power washing. Junk Raps in Long Island, NY outlines key steps to ensure your property is ready for cleaning and protected from damage

Hear from Our Customers

A person in green rubber boots, gloves, and protective clothing is pressure washing Montgomery County, MD paving stones in red and gray on an outdoor path beside some bushes.

Professional Power Washing Services

What Clean Really Looks Like

You know that feeling when you drive up and actually feel proud of how your house looks? That’s what happens when years of grime, mildew, and weather stains finally come off your siding, deck, and driveway.

Your neighbors notice. Your family notices. And honestly, you’ll probably find yourself taking the long way home just to see it again.

The difference isn’t just cosmetic either. All that buildup you’ve been staring at isn’t just ugly—it’s slowly eating away at your surfaces. Professional power washing removes the contaminants that cause premature aging, cracking, and expensive repairs down the road. You’re not just getting clean, you’re getting protection for one of your biggest investments.

Glenallen Power Washing Company

We Know What Works Here

High Pro Power Washing Service Inc has been cleaning homes throughout Montgomery County for years, and we’ve learned a thing or two about what Glenallen properties face. The pollen that coats everything in spring. The humidity that breeds mildew in summer. The leaves and debris that stain surfaces in fall.

We’re not the guys who show up with a pressure washer and hope for the best. Every surface gets the right pressure, the right cleaning solution, and the right technique. Your vinyl siding needs different care than your composite deck, and your natural stone walkway requires a completely different approach than your concrete driveway.

That’s the difference between getting it clean and getting it right.

A power washer in MD cleans white vinyl house siding, revealing a sharp line between the freshly washed, bright surface on the left and the dirtier, grayish side—showcasing expert pressure washing Montgomery County results.

House Power Washing Process

Simple Process, Professional Results

We start with a walkthrough of your property to identify what needs attention and any areas that require special care. Different surfaces, different stains, different approaches—this isn’t one-size-fits-all work.

Next comes the prep work that most people skip but makes all the difference. We protect your plants, cover electrical fixtures, and pre-treat stubborn stains. Then we get to work with commercial-grade equipment that delivers consistent pressure and coverage you can’t get from rental units.

The cleaning itself moves systematically around your property—siding, decks, walkways, driveways, whatever needs attention. We adjust pressure and technique for each surface because your expensive composite deck shouldn’t get the same treatment as your concrete garage floor. After everything’s clean, we do a final inspection to make sure nothing was missed and your property is ready to impress.

A close-up of a pressure washer spraying water onto a wooden deck, cleaning the surface and making the wood look brighter and cleaner. Green plants are visible in the blurred background, showcasing expert pressure washing Montgomery County, MD.

Ready to get started?

Explore More Services

About High Pro Power Washing

Get a Free Consultation

Exterior House Cleaning Services

Complete Exterior Cleaning Coverage

Our power washing service includes everything that makes your property look tired and worn down. House siding gets the full treatment—vinyl, fiber cement, brick, whatever you’ve got. Decks and patios get cleaned without the damage that comes from too much pressure or wrong techniques.

Driveways and walkways get attention too, because that oil stain in your driveway and the green algae on your front walk aren’t doing your curb appeal any favors. We handle concrete, pavers, natural stone, and asphalt with the right approach for each material.

Here in Glenallen, we see a lot of mildew and algae growth thanks to our climate. We don’t just blast it off and call it good—we treat it properly so it stays gone longer. The goal isn’t just clean, it’s clean that lasts.

A man in a red shirt and cap uses a pressure washer to clean the exterior wall of a house near a door and window, surrounded by greenery and sunlight, showcasing expert pressure washing Montgomery County, MD.

How often should I have my house power washed?

Most Glenallen homes benefit from professional power washing every 1-2 years, but it depends on your specific situation. Homes with lots of shade, near trees, or facing weather tend to need cleaning more frequently. If you’re seeing green or black streaks on your siding, or if your deck feels slippery when wet, it’s time. The good news is that regular cleaning actually extends the time between services because we’re not letting buildup get out of hand. We’ll give you an honest assessment of what your property needs and when you should call us back.
Not when it’s done right. The key is using the correct pressure for each surface and knowing how to adjust technique based on what we’re cleaning. Vinyl siding needs much lower pressure than concrete, and composite decking requires a completely different approach than natural wood. We’ve been doing this long enough to know what works and what causes damage. That’s why we use commercial equipment with precise pressure control instead of the rental units that only have one setting. Your surfaces get clean without getting damaged.
A typical house and driveway usually takes 2-4 hours, depending on size and how much cleaning is needed. Larger properties or homes that haven’t been cleaned in years will take longer. We’re not rushing through your property just to get to the next job—we’re making sure everything gets the attention it needs. You don’t have to be home during the cleaning, but we’ll walk through everything with you beforehand so you know exactly what to expect and when we’ll be finished.
Technically, power washing uses heated water while pressure washing uses cold water, but most people use the terms interchangeably. What matters more is having the right equipment and knowing how to use it properly. We use both hot and cold water depending on what we’re cleaning—hot water works better for grease and oil stains, while cold water is fine for most dirt and mildew. The real difference comes from using commercial-grade equipment with proper pressure control and having the experience to know what each surface needs.
Our focus is on power washing services—siding, decks, driveways, walkways, and other surfaces that benefit from pressure cleaning. We don’t do gutter cleaning or window washing because those require different equipment and techniques to do properly. We’d rather excel at what we do best than try to be everything to everyone. If you need those services, we’re happy to recommend trusted local companies that specialize in that work. Our job is making sure your exterior surfaces look their best.
Move any outdoor furniture, decorations, or vehicles away from the areas being cleaned. Close all windows and doors, and let us know about any loose siding, broken fixtures, or areas of concern. We’ll handle protecting plants and covering electrical outlets, but it helps to know about anything that might need special attention. If you have pets, just make sure they’re inside during the cleaning. We’ll take care of the rest and make sure your property is ready for cleaning when we arrive.