Power Washing in Alta Vista, MD

Clean Exteriors That Actually Last

Professional power washing that restores your property’s value and eliminates the guesswork of DIY cleaning attempts.

Proper surface preparation is crucial for effective power washing. Junk Raps in Long Island, NY outlines key steps to ensure your property is ready for cleaning and protected from damage

Hear from Our Customers

A person in green rubber boots, gloves, and protective clothing is pressure washing Montgomery County, MD paving stones in red and gray on an outdoor path beside some bushes.

Professional Power Washing Services

Your Property Looks New Again

You know that feeling when you drive up to a freshly cleaned property. Everything looks crisp, well-maintained, and valuable again. That’s what proper power washing delivers.

The difference isn’t just cosmetic. When we remove years of built-up grime, mold, and algae from your siding, driveway, and deck, we’re actually protecting these surfaces from damage. That green algae eating away at your deck boards stops destroying the wood. The black streaks making your roof look old disappear completely.

Your neighbors notice. Your family feels proud pulling into the driveway. And you stop worrying about what your house looks like from the street. Clean exteriors change how your entire property feels, and the results stick around when the job’s done right.

Alta Vista Power Washing Company

We Know Alta Vista Properties

High Pro Power Washing Service Inc has been cleaning exteriors throughout Alta Vista and the surrounding Maryland area for years. We understand how Mid-Atlantic weather affects your property – the humidity that breeds mold, the pollen that sticks to everything, and the winter grime that builds up over months.

You’re not getting a one-size-fits-all approach. Different surfaces need different pressure levels and cleaning solutions. We adjust our methods based on your siding material, the age of your deck, and the specific stains we’re removing.

Our team shows up with professional equipment, handles the setup and cleanup, and leaves your property looking like you just moved in. No surprises, no damage, no hassle.

A power washer in MD cleans white vinyl house siding, revealing a sharp line between the freshly washed, bright surface on the left and the dirtier, grayish side—showcasing expert pressure washing Montgomery County results.

House Power Washing Process

Simple Process, Professional Results

We start with a walkthrough of your property to identify what needs attention and any areas requiring special care. Different stains need different approaches, and we explain exactly what we’ll be doing before we start.

Next comes the actual cleaning. We use the right pressure settings for each surface – higher pressure for concrete driveways and walkways, gentler settings for siding and painted surfaces. For delicate areas or heavy organic growth, we apply specialized cleaning solutions that break down stains without damaging your property.

The final step is a thorough rinse and cleanup. We make sure all cleaning solutions are completely removed, your landscaping is protected, and any debris is cleared away. You get to walk around your property and see the difference immediately. Most customers are surprised by how much brighter and cleaner everything looks compared to what they expected.

A close-up of a pressure washer spraying water onto a wooden deck, cleaning the surface and making the wood look brighter and cleaner. Green plants are visible in the blurred background, showcasing expert pressure washing Montgomery County, MD.

Ready to get started?

Explore More Services

About High Pro Power Washing

Get a Free Consultation

Exterior House Cleaning Services

Complete Exterior Cleaning Coverage

Our power washing services cover everything on your property’s exterior. House siding gets the most attention because it’s the largest surface and shows dirt the most, but we also handle driveways, walkways, decks, patios, fences, and outdoor furniture.

Each surface gets treated appropriately. Vinyl siding gets cleaned with moderate pressure and biodegradable detergents. Concrete driveways can handle higher pressure for removing oil stains and embedded dirt. Wood decks require careful pressure control to avoid gouging while still removing years of weathering and stains.

We bring our own water supply when needed and handle all the setup. You don’t need to move cars, drag out hoses, or worry about your water pressure. We show up ready to work and leave your property cleaner than it’s been in years. The service includes a full cleanup, so you’re not dealing with any mess afterward.

A man in a red shirt and cap uses a pressure washer to clean the exterior wall of a house near a door and window, surrounded by greenery and sunlight, showcasing expert pressure washing Montgomery County, MD.

How often should I have my house power washed in Alta Vista?

Most Alta Vista homes benefit from power washing every 12-18 months, though this varies based on your specific conditions. Properties with more shade, near trees, or facing north tend to develop mold and algae faster and might need cleaning annually. Homes in full sun with good air circulation can often go two years between cleanings. The key indicator is when you start noticing green or black streaks on your siding, or when your driveway looks noticeably darker than when it was new. Regular cleaning actually makes each subsequent cleaning easier and more effective.
Professional power washing won’t damage your surfaces when done correctly, but technique and pressure settings matter enormously. We adjust pressure based on the material – vinyl siding gets treated much differently than concrete. Older wood siding or decks require lower pressure and sometimes pre-treatment with cleaning solutions instead of relying on pressure alone. The biggest risk comes from inexperienced operators using too much pressure or holding the nozzle too close to the surface. We’ve seen plenty of DIY damage over the years, which is why proper training and experience make such a difference in the final results.
Power washing uses heated water while pressure washing uses cold water – that’s the technical difference. In practice, both terms get used interchangeably, and most residential cleaning uses cold water pressure washing. Hot water works better for removing grease and oil stains, so we use it selectively for driveways with automotive stains or heavily soiled areas. For most house siding, deck cleaning, and general exterior work, cold water with the right pressure settings and cleaning solutions delivers excellent results. The equipment, technique, and experience matter more than whether the water is heated.
A typical single-story house takes 2-4 hours depending on size and how much additional surface area you want cleaned. Two-story homes usually require 4-6 hours. The timeline depends on several factors: total square footage, how dirty the surfaces are, whether we’re cleaning just siding or including driveways and decks, and how much detail work is needed around windows and trim. We don’t rush the job because proper cleaning requires time for solutions to work and thorough rinsing. Most customers are surprised that professional cleaning takes longer than they expected, but the results justify the time investment.
We bring our own professional-grade equipment and can provide water for most jobs, though we typically use your water supply when it’s readily available since it’s more efficient. We do need access to electricity for our equipment, usually through an outdoor outlet or garage. If your property doesn’t have convenient electrical access, we can bring generators for smaller jobs. We handle all the setup and breakdown, including hose routing and equipment positioning. You don’t need to do any prep work beyond making sure we can access the areas that need cleaning and that outdoor electrical outlets are accessible.
Preparation is minimal but important for the best results. Remove or cover outdoor furniture, grills, and decorative items that might get in the way or be damaged by overspray. Close all windows and doors, and let us know about any areas where water shouldn’t go, like electrical panels or air conditioning units. If you have delicate plants right against the house, we can cover them, but it helps to know about them in advance. Move vehicles out of driveways if you want those areas cleaned. Most importantly, do a quick walk-around to point out any loose siding, damaged caulking, or other issues that might need special attention during cleaning.